Monday, December 11, 2017

Jual BEROL 226

Berol 226 is an optimized surfactant blend intended for use in water based alkaline and acid cleaners.


SPECIFICATIONS
                                                                      Limits                          Method
Functional test                                           min 40°C                      AB-46-1873*
pH, 1% in water                                           5-8                               AB-46-1206*

Typical data
Chemical and physical data
Typical values

Active content
Appearance, 20°C
Clear point
Pour
Density, 20°C
Flash point
Pour point
Viscosity, 20°C


100%
clear/slight opalescent liquid
-7°C
< 7 Gardner
1010 kg/m3
>100oC
-10°C
80 mPa s

Surface active characteristics
Foam height, mm, according to Ross-Miles, 50°C, 0.05%

Surface tension according to Du NoGy,25°C, 0.1% DIN53914
Wetting power according to Draves, 25°C, 0.1%

Typical values
immediately: 130mm
after 5 min: 110mm

27 mN/m
15 sec


SOLUBILITY
The solubility of Berol 226 is as follows :

Ethanol
Isopropyl alcohol
Lowaromatic solvent
Propylene glycol
Water
White spirit
Xylene
soluble
soluble
insoluble
soluble
soluble
insoluble
dispersible

Technical Data
Berol 226 is an optimized surfactant blend designed for use in water based alkaline cleaners, for hard surface cleaning, e.g. vehicle cleaning and in workshop industries.

Berol 226 is a combination of non-ionic and cationic surfactants. This surfactant blend together with complexing agent gives a very good degreasing effect.

Berol 226 is designed to be used as the only surfactant together with a complexing agent and other salts in water solutions. The good cleaning effect can be greatly reduced if other surfactants are added.

Berol 226 can be used in cleaners for high pressure equipment.

Berol 226 is also usable in acid cleaners.

Handling

If Berol 226 has been stored below its clear point, it should be homogenised before use, unless the entire quantity is used.
For any further info please call us.