HOME

Thursday, August 31, 2017

JEFFAMINE APPLICATION

FLOORING, TROWELING and MORTARS

An important application are for Jeffamine D 230 is their use in highly filled epoxy formulations for industrial or decorative floor coatings. There are two primary types of epoxy flooring systems: Self leveling and trowel coverings. Epoxy flooring can be as simple as a thin film clear or lightly pigmented formulation or a series of build up coating layers. However, most epoxy floors today consist of several coats, which usually include at least a base coat, mid coat and glaze or topcoat.

Self leveling flooring have lower filler contents ( less than 4:1 filler to epoxy binder ), permitting the material to be spread over the substrate, usually concrete, to a thickeness of about 1/8 inch. Such binder rich flooring are more chemically resistant. Skid or slip resistance may be improved by broadcasting sand or other mineral fillers over the top of the floor prior fo final curing.

Trowable floorings generally are more highly filled ( 6-8:1 filler to binder ratios ) with a coarse mineral filler, such as quartz and / or silica sand. These higher filler loadings lead to outstanding abrasion resistance, coupled with excellent mechanical strength. Such systems are usually screeded or troweled over the substrate to a thickness of 1/4 inch or less.

A special type of synthetic epoxy surface is the pebble finished system, where decorative river rock is used as the filler at levels of 10-15:1 over the epoxy binder. In these applications the clear epoxy is also a high gloss coating or decorative glaze for the aggregate material. These systems are sometimes known as decorative aggregate and have been popular for interior and exterior applications in flooring, walkways and swimming pool decks.

The performance of an epoxy based floor system depends on proper selection and formulation of components, as well as adequate substrate surface preparation. The Jeffamine products, along with monononylphenol ( MNP ) have found application in all of the above flooring systems. These are often used in combination with polyamides or cycloaliphatic amine hardeners to achieve desired performance characteristics, which include appearance, chemical resistance, impact resistance and abrasion resistance.

Heavily filled epoxy systems may be used for structural  applications, such as concrete reinforcement. Often referred to as polymer concrete, these materials are used in applications, such as bridge overlays and other areas requiring higher compressive strengths than offered by conventional porland cement concrete. Similar formulations are also used for tile grouting or mortars and concrete repair.

Repair of cracked concrete structures may be accomplished by injection of clear epoxy systems into the areas around the developing crack. This is done by injecting a low viscosity, slow curing epoxy formulation using a syringe delivery into many, finely drilled cavities in the vicinity of the crack. The Jeffamine, such as D 230, D 400, T 403 are ideal for such systems, which have the ability to saturate deep into the concrete matrix before the  epoxy matrix begins to gel and finally set or cure. This practice of crack injection has been used in the repair of concrete building, bridges, railroad ties, and dams.

All of the above described applications fall into the broad category of construction, or civil engineering. Aside from surface coatings and adhesives, materials included would be the " synthetic " concretes, mortars, grouts, and putties. Such materials certainly find extensive use in new construction and various civil engineering applications; and for patching and repair, they have no peer. Several specific examples follow.


SURFACE COATING FORMULATIONS

SURFACE COATING

The properties of JEFFAMINE curatives lend themselves to the preparation of excellent coatings and protective finishes. Epoxy coatings cured with JEFFAMINE products are flexible , tough, and resistant to impact and abrasion. They have excellent resistance to blushing compared to other amine hardeners.

Formulation useful in several coating application areas follow :

DECORATIVE COATING

1. Decoupage

   A popular application for epoxies is in decoupage type coatings where objects such as wooden plaques,clocks, pictures and signs are coated with a high gloss finish. JEFFAMINE are ideally suited for this application, providing clear, blush freee, glossy, solvent free, high build coatings.

Part 1 resin                 Pbw     PBvol
Epoxy resin                            100

Part 2 Curative  
Jeffamine                     30
MNP                           60
AEP                              4



pelapis kayak

jual epoxy curing agent

jual epoxy curing agent
Decoupage table

Casting jeffamine
Casting & Encapsulation 



Jeffamine D 230 as specialty epoxy curing agent

For any formulation guide such as Non Yellowing Varnish, Protective coating such as Organic Zinc Rich Primer, Coal Tar Epoxy,  High Solid Epoxy, Seamless floors, Sand Filled Flooring, Decorative Aggregate, Polymer conrete, Trowel coating, Reinforced composites, Wind turbine blades, Filament Wound Tanks and Piping, Boats, Casting and Encapsulation, Adhesives, etc.

Next " Epoxy Coating for steel/metal/ Car Body "

Please feel free to call me,

Michael
http://wa.me/+6285894436642
michael@sanminglobe.com

No comments:

Post a Comment

Note: Only a member of this blog may post a comment.