HOME

Tuesday, January 29, 2019

Jual Epoxy Coating for Metal

Steel will rust only if water and oxygen are both present and the rusting process is greatly accelerated by pollutants in the atmosphere, such as sulphur dioxide from the burning of oil, coal, or gas and chlorides from de-icing salts or marine atmospheres. Solid pollutants can be hygroscopic and may promote localised attack (e.g. corrosion pitting) at specific points on exposed steel. Protective systems must be resistant to attack by such pollutants and should be applied only to surfaces from which they have been removed.

To ensure good coating adhesion, it is essential that the surface to be coated is rendered free of dirt, dust and debris that might affect performance. Water-soluble residues, if left on the surface, will cause rapid deterioration at the interface with paint when the coating is exposed to moisture.

Paint is the most commonly used material to protect steel, and in practice the term, ‘paint’ covers a wide range of materials with different properties. The application of paint is comparatively easy with no limitation on the size of steelwork that can be treated.

For structural steelwork the paint film thickness is important for lasting protection since it is difficult to obtain perfect application under construction conditions. Best results are obtained when coatings are applied in heated enclosed workshops; units for bridge structures and building framework can be coated in this manner before erection and additional coats may be applied on site, where required.

EPOXY PRIMERS
Epoxy primers are two-pack materials utilising epoxy resins and usually have either polyamide or polyamine curing agents. They are pigmented with a variety of inhibitive and non-inhibitive pigments. Zinc phosphate epoxy primers are the most frequently encountered and give the best durability within the group.

Epoxy coatings are generally packaged in two parts that are mixed prior to application. The two parts consist of 1) an epoxy resin which is cross-linked with 2) a co-reactant or hardener. Epoxy coatings are formulated based upon the performance requirements for the end product. When properly catalyzed and applied, epoxies produce a hard, chemical and solvent resistant finish. They are typically used on concrete and steel to give resistance to water, alkali and acids.


For any query Hardener and Epoxy Resin for Metal Coating please feel free to contact us.


Regards,

Michael
michael@sanminglobe.com
WA 0858944436642

No comments:

Post a Comment

Note: Only a member of this blog may post a comment.