Functional test min 40°C AB-46-1873*
pH, 1% in water 5-8 AB-46-1206*
Chemical and physical data
clear/slight opalescent liquid
< 7 Gardner
80 mPa s
Surface active characteristics
Foam height, mm, according to Ross-Miles, 50°C, 0.05%
Surface tension according to Du NoGy,25°C, 0.1% DIN53914
Wetting power according to Draves, 25°C, 0.1%
after 5 min: 110mm
The solubility of Berol 226 is as follows :
Berol 226 is an optimized surfactant blend designed for use in water based alkaline cleaners, for hard surface cleaning, e.g. vehicle cleaning and in workshop industries.
Berol 226 is a combination of non-ionic and cationic surfactants. This surfactant blend together with complexing agent gives a very good degreasing effect.
Berol 226 is designed to be used as the only surfactant together with a complexing agent and other salts in water solutions. The good cleaning effect can be greatly reduced if other surfactants are added.
Berol 226 can be used in cleaners for high pressure equipment.
Berol 226 is also usable in acid cleaners.
If Berol 226 has been stored below its clear point, it should be homogenised before use, unless the entire quantity is used.
Next free ebook " Formulation Guide using Berol 226 " ----> " Industrial Cleaning Formulation Guide "
For any further info please call us.
Post a Comment
Note: Only a member of this blog may post a comment.