SPECIFICATIONS
Limits Method
Functional test min 40°C AB-46-1873*
pH, 1% in water 5-8 AB-46-1206*
Typical data
Chemical
and physical data
|
Typical
values
|
Active content
Appearance,
20°C
Clear point
Pour
Density, 20°C
Flash point
Pour point
Viscosity,
20°C
|
100%
clear/slight
opalescent liquid
-7°C
< 7 Gardner
1010 kg/m3
>100oC
-10°C
80
mPa s
|
Surface active
characteristics
Foam
height, mm, according to Ross-Miles, 50°C, 0.05%
Surface
tension according to Du NoGy,25°C, 0.1% DIN53914
Wetting
power according to Draves, 25°C, 0.1%
|
Typical values
immediately:
130mm
after 5 min:
110mm
27 mN/m
15
sec
|
SOLUBILITY
The solubility of Berol 226 is as follows :
Ethanol
Isopropyl
alcohol
Lowaromatic
solvent
Propylene
glycol
Water
White spirit
Xylene
|
soluble
soluble
insoluble
soluble
soluble
insoluble
dispersible
|
Technical Data
Berol 226 is an optimized
surfactant blend designed for use in water based alkaline cleaners, for hard
surface cleaning, e.g. vehicle cleaning and in workshop industries.
Berol 226 is a combination
of non-ionic and cationic surfactants. This surfactant blend together with complexing
agent gives a very good degreasing effect.
Berol 226 is designed to
be used as the only surfactant together with a complexing agent and other salts
in water solutions. The good cleaning effect can be greatly reduced if other
surfactants are added.
Berol 226 can be used in
cleaners for high pressure equipment.
Berol 226 is also usable
in acid cleaners.
Handling
If Berol
226 has
been stored below its clear point, it should be homogenised before use, unless
the entire quantity is used.
For any further info please call us.
No comments:
Post a Comment
Note: Only a member of this blog may post a comment.