BYK 300

BYK 300 adalah bahan kimia tambahan yang digunakan dalam proses pembuatan cat. 

BYK 300 merupakan komposisi campuran polydimethylsiloxane yang dimodifikasi polyether.

Aditif byk 300 ini dapat memberikan pengurangan tegangan permukaan menengah dalam sistem pelapisan.  Byk 300 memiliki kemampuan untuk  meningkatkan slip dan meningkatkan leveling dan gloss. juga meningkatkan kualitas media sifat pembasahan dan anti-pemblokiran.

BYK-300 kompatibel secara luas dan cocok untuk semua sistem yang mengandung pelarut. Dosis penggunaan yang Direkomendasikan 0,1-0,3% aditif (seperti yang disediakan) berdasarkan formulasi total.

Kesimpulan : 

BYK 300 memperbaiki pembasahan pigmen dan meningkatkan slip untuk pelapis berbasis pelarut.

Michael

085894436642

BYK 300

BYK-300

Silicone surface additive for solvent-borne coating systems with a medium reduction of surface tension and a medium increase of surface slip.

Composition

Solution of a polyether-modified polydimethylsiloxane

Special Features and Benefits

The additive provides a medium reduction of surface tension in the coating systems. It increases slip and improves leveling and gloss. Silicone additives prevent the formation of Bénard cells. BYK-300 also improves substrate wetting and anti-blocking properties.

Benefit used

• Anti-blocking Agents > Silicones / Silicas / Siloxanes
• Flow / Levelling Agents > Silicones
• Slip Control Agents > Silicones
• Surface Conditioners / Surface Modifiers > Gloss Control Agents
• Wetting Agents / Wet Edge Enhancers > Silicones

Recommended Use

BYK-300 is broadly compatible and suitable for all solvent-borne systems.

Recommended Levels 0.1-0.3% additive (as supplied) based upon total formulation.

The above recommended levels can be used for orientation. Optimal levels are determined through a series of laboratory tests.

Incorporation and Processing Instructions

The additive can be incorporated during any stage of the production process, including post-addition. Thinning before incorporation may make dosing easier.

Special Note

Unlike so-called silicone oils, this additive is very user-friendly. However, before use, one should determine in test series whether foam is stabilized in certain systems and check the recoatability and crater development.

Regards,

Michael Thang

085894436642

BYK 300 as one of Additive for coating

BYK-300

Silicone surface additive for solvent-borne coating systems with a medium reduction of surface tension and a medium increase of surface slip.

Composition

Solution of a polyether-modified polydimethylsiloxane

Special Features and Benefits

The additive provides a medium reduction of surface tension in the coating systems. It increases slip and improves leveling and gloss. Silicone additives prevent the formation of Bénard cells. BYK-300 also improves substrate wetting and anti-blocking properties.

Benefit used

• Anti-blocking Agents > Silicones / Silicas / Siloxanes
• Flow / Levelling Agents > Silicones
• Slip Control Agents > Silicones
• Surface Conditioners / Surface Modifiers > Gloss Control Agents
• Wetting Agents / Wet Edge Enhancers > Silicones

Recommended Use

BYK-300 is broadly compatible and suitable for all solvent-borne systems.

Recommended Levels 0.1-0.3% additive (as supplied) based upon total formulation.

The above recommended levels can be used for orientation. Optimal levels are determined through a series of laboratory tests.

Incorporation and Processing Instructions

The additive can be incorporated during any stage of the production process, including post-addition. Thinning before incorporation may make dosing easier.

Special Note

Unlike so-called silicone oils, this additive is very user-friendly. However, before use, one should determine in test series whether foam is stabilized in certain systems and check the recoatability and crater development.

Regards,

Michael Thang

085894436642