CHEMICAL SUPPLIER : September 2016

Thursday, September 15, 2016


Benzyl alcohol is an aromatic alcohol with the formula C6H5CH2OH. The benzyl group is often abbreviated "Bn" (not to be confused with "Bz" which is used for benzoyl), thus benzyl alcohol is denoted as BnOH. Benzyl alcohol is a colorless liquid with a mild pleasant aromatic odor. It is a useful solvent due to its polarity, low toxicity, and low vapor pressure. Benzyl alcohol is partially soluble in water (4 g/100 mL) and completelymiscible in alcohols and diethyl ether. The anion produced by deprotonation of the alcohol group is known as benzylate or benzyloxide.

Benzyl alcohol is produced naturally by many plants and is commonly found in fruits and teas. It is also found in a variety of essential oils including jasmine,hyacinth, and ylang-ylang.
It is also one of the chemical compounds found incastoreum from the castor sacs of beavers.

Benzyl alcohol is used as a general solvent for inks, waxes, shellacs, paints, lacquers, and epoxy resin coatings. Thus it can be used in paint strippers, especially when combined with compatible viscosity enhancers to encourage the mixture to cling to painted surfaces. It is a precursor to a variety ofesters, used in the soap, perfume, and flavor industries. It is also used in e-liquid for e-cigarettes to enhance the flavors used. When applied to damaged skin or mucous membranes at a 10% concentration it acts as a local anesthetic and antimicrobial agent, and is sometimes included as a degreaser in rug cleaning products. As a dye solvent, it enhances the process of dying wool, nylon, and leather. It also has use as a photographic developer, and as an insect repellent.

source :


For any requirement please feel free to contact us.

Monday, September 5, 2016



Acidic aqueous cleaning is typically used for scale, rust and oxide removal. Most materials will be attacked by acidic solutions, depending on exposure time. A large concern in some applications is the possibility of hydrogen embrittlement caused by acidic cleaning. Waste disposal will involve pH adjustment and possible removal of the soil components.

General Information Acidic 
cleaners are effective for removing rust from ferrous parts. 

Acidic cleaners are commonly used for the removal of: - mill scale (hot rolled scale) - scale developed during welding - scale developed during heat treating - superficial oxide which interferes with painting, porcelain enameling, tinning, galvanizing, or electroplating - rust and corrosion products - hard water scale - products of reaction of hard water with soil, especially protein (milkstone, beerstone) 

Acidic cleaners can also be used to clean aluminum, a metal susceptible to etching when cleaned with strong alkaline detergents. 

Notes :
Cairan Sanmin Acid Cleaner, efektif sebagai antibakteri non kimia cocok untuk  obat kumur, anti jerawat, sterilisasi perlengkapan operasi, alat potong, Pembersih kandang hewan dll.

Data Efektivitas Cairan Antibakteri :

Next :
> " Cairan Penghilang Bau "  
> " Cairan Pembersih Buah, Sayuran, Beras dll."   
> Acid Cleaner  for Industrial Cleaning

For any further info please feel free to contact me.



Mineral aqueous cleaning solutions are the most common form of aqueous chemistry. These solutions may have pH values that range from a pH of 8 to a pH of 11.5. Alkaline chemistries commonly have various additives to improve performance characteristics. 

These solutions can be used with all types of liquid processes (e.g. sprays, ultrasonics, immersion, and power washers). These chemistries remove coolants and cutting oils, shop diR, finger prints, cosmolene, petrolatums, and some water soluble paints. 

Parts cleaned include hydraulic valve bodies, fuel injector components and machined aluminum castings. These solutions are used for all cleanliness levels. Cost per gallon is generally cheaper than for semi-aqueous compounds. You should not automatically assume that you can put alkaline aqueous solutions down the dram. You need to check with your local water treatment authority before disposing of these solutions down the drain. 

Efective to remove :
> Cutting oils and coolants
> Cosmolene
> Grease
> Finger prints
> Shop dirt
> Pesticides on 
   * Vegetables
   * Fruits
   * Rice, etc. 

Alkaline cleaners may be designed to allow good separation between the water and contaminants such as oils. This allows control of the waste streams produced during cleaning: by allowing the contaminated liquid to separate, the aqueous solution can be recycled back to the process and the contaminant can be trapped. 

Alkaline aqueous cleaners have been successfully used to clean mild and stainless steels. Flash corrosion may be a problem with other materials. Alkaline cleaners may be used over a very broad range of temperatures. This may increase its suitability for general purpose cleaning. Aqueous systems can be designed as closed loop systems. Various filtration technologies can be used to separate the water from the contaminant.
Cairan Sanmin Alkaline Cleaner adalah cairan yang efektif untuk membersihkan bahan pestisida, efektif untuk mencuci buah-buahan, sayuran, beras dll.

Notes : Cairan Antibakteri yang ramah lingkungan silahkan buka

For any further info please feel free to contact me.

Thursday, September 1, 2016

Deta application used for clear two part epoxy flooring and wood epoxy resin

Deta application used for clear two part epoxy flooring and wood epoxy resin

Diethylenetriamine (abbreviated DETA and also known as 2,2’-Iminodi(ethylamine)[2]) is an organic compound with the formula HN(CH2CH2NH2)2. This colourless hygroscopic liquid is soluble in water and polar organic solvents, but not simple hydrocarbons. Diethylenetriamine is structural analogue of diethylene glycol. Its chemical properties resemble those for ethylene diamine, and it has similar uses. It is a weak base and its aqueous solution is alkaline.  DETA is a by product of the production of ethylenediamine from ethylene dichloride.

Diethylenetriamine is a yellow liquid with an ammonia-like odor. Less dense than water. Corrosive to metals and tissue. Vapors heavier than air. Burns, although possibly difficult to igntie. Toxic oxides of nitrogen produced during combustion. Used as a solvent for plastics and dyes and in chemical synthesis. Boiling Point 207 DEG C @ 760 MM HG, Melting Point -39 DEG C, Flash Point 101.7 deg C (Open cup), water solubility 1000 mg/mL.